SW-20
The Continuation of ECAS-20
The pursuit of reduced idle times both mechanically and electrically through the latest software allow complex components to be manufactured in the fastest possible times to improve both production output & profitability.
Advantages:
- Simultaneous machining (turning & drilling, etc.) by opposing plattens leads to shortened machining time.
- The 8-spindle tool post (with Y-axis) exclusively designed for back working. Front and back working are independently controlled to greatly reduce machining time.
- The Star Motion Control System ensures an uninterrupted tool path.
- A tool post (with Y-axis control) exclusively designed for 8-spindle back working is equipped.
- A variety of new functions, such as manual handle retracing, program check, code help and others are added to help the operator.
Tool kinematics
Specifications SW-20 |
| Max. machining diameter |
Ø 20 mm (25/32 in) |
| Max. headstock stroke (Standard) |
205mm (8 in) |
| Tool post configuration |
Front |
Turning Tool + Power-driven tool |
| Rear |
Turning Tool + End working stationary tool + Power-driven tool |
| Number of turning tools |
Front |
4 tools (12mm/16mm) |
| Rear |
2 tools (12mm/16mm) |
| 4-spindle sleeve holder |
Number of tools |
Front 4 tools |
| Rear 2 tools (max. 4 tools) |
| Max. drilling capacity |
Ø 10 mm (25/64 in) |
| Max. tapping capacity |
M8 x P1.25 |
| Power driven att. |
Number of tools |
Front: 3 tools |
| Rear: 3 tools |
| Max. drilling capability |
Ø 8 mm (5/16 in) |
| Max. tapping capability |
M6 x P1.0 |
| Max. milling capability |
Ø 10 mm (25/64 in) |
| Max. slotting capability |
1.5mm (W) x 4mm (D) |
| Main spindle indexing angle |
C-axis control |
| Main spindle speed |
Max. 10,000 min-1 |
| Main spindle motor |
Built-in motor drive
2.2kw (Continuous)/3.7kw (10min/25%ED) |
| Dimensions (W x D x H) |
2,588 x 1,150 x 1,765 mm |
| Weight |
3,500 kg |
Backworking attachment SW-20 |
| Max. chucking diameter |
Ø 20 mm (25/32 in) |
| Max. length for front ejection |
80mm (3-5/32 in) |
| Max. work projection length |
Ø 30 mm (1-11/64 in) |
| Number of tools |
8 tools |
| 4-spindle unit |
Max. drilling capability |
Stationary tool: Ø 10 mm (25/64 in) |
| Power-driven tool: Ø 8 mm (5/16 in) |
| Max. tapping capabiilty |
Stationary tool: M8 x P1.25 |
| Power-driven tool: M6 x P1.0 |
| Sub-spindle indexing angle |
C-axis control |
| Sub-spindle speed |
Max. 10,000 min-1 |
| Sub-spindle motor |
Built-in motor drive
2.2kw (Continuous)/ 3.7kw (10min. /25%ED) |
| Power-driven att. spindle speed |
Max. 8,000 min-1 |
* Specifications are subject to change
