TRI-MIST 500

Features & Specifications

• Up to 99% per ASHRAE 52.1. Effective on all metalworking fluids.

• Very low maintenance. No disposable filters to replace,ever!

• The TRI-MIST 500 is compact and can be direct mounted to the machine tool enclosure. Optional flex-duct and inlet plenum options allow for remote installations.

• Buy our new TRI-MIST 500 under our performance guarantee, and if you are not satisfied, return it for a full refund.

• The TRI-MIST 500 operates at less than 250 watts

• Four-year warranty on complete unit!

Specifications:

• 25” x 13.75” x 20.25” Inlet Opening: 16.70” x9.10”

• Solid-state, dual voltage self-regulating.

• 16 ga. Steel welded with chemical resistant powder paint

• 115 Vac, 60
  HZ, 2 amps. 208-230 Vac, 50-60 HZ, 1 amp.

• 83 lbs Installed; 95 lbs.Shipping

• Vibration free,backward curve rated at 710 cfm @ 0.0” w.g.

• Up to 99% per ASHRAE 52.1

• 69 dBa

• 1st Stage – 3” mechanical impinger.
• 2nd Stage – ESP cell 53 sq. ft. of surface area (Minimum voltagegradient is 20,000 volts per inch.)
• 3rd Stage – ESP cell 53 sq. ft. of surface area.
• 4th Stage – 1” thick post filter 5th Stage – Optional HEPAMAX filter rated at 99.97% DOP @ .3 micron.

• Double Pass ESP
• Technology
  
• Motor and control prewired
  
• Variable Speed Controller
  
• Four year parts warranty

• 50-550 CFM

• Source capture plenum
  
• 5th Stage HEPA, 99.97% @ .3 micron
  
• Machine mount stand
  
• Ceiling hanging kit
  
• Flex Duct